Product guide

44
Lenses Cameras Hardware
Control
Room
IP Media &
Transmission
Radar
Detection
ANPR Accessories
615/48/12/0TT Over the Top Pan/Tilt Unit, DV Version
610/12/6/0TT Over the Top Pan/Tilt Unit, AV Version
Ordering Codes:
610-615 RANGE
Pan & Tilt Units
Hardware
G IP68
G AC or DC version
G Simple installation
G Suitable for all CCTV housing
G High accuracy
These pan and tilt heads are designed to the highest quality and performance
standards. Precision engineering culminates in a product line that is extremely
compact and robust with certification to IP68.
A high load carrying ability with regenerative breaking for rapid deceleration
ensures that precise control is always available. Backlash is a mere 0.15˚.
The precision engineering of these units make them a very stable mounting
platform for your CCTV camera fitted with high zoom ratio lenses.
These pan and tilt units are designed to make the installation as simple and as
easy as possible. Once installed, they require little or no maintenance.
The pan and tilt units are also available as AC or DC options, with or without
presets and side mount (SM) or over the top (OTT).
The mounting plates of the units have been designed to fit a standard 4” PCD.
This standard mount allows for easy fitting of column spacers, mounting
brackets etc. (supplied separately).
These models are typically used for town centre surveillance, border control,
ports, traffic surveillance or almost anywhere high load capabilities are required.
The most popular pan and tilt options are listed below but please contact us for
any variation of these that you require.
Perfect Partners
Column Spacers
900 Housing
Page 45
MODEL 615/48/12/OTT 610/12/6/OTT
Operating Voltage 24V DC 230V AC
Max Load (nominal) 12kg 12kg
Pan Speed (max) 48˚ variable 12˚ fixed
Tilt Speed (max) 12˚ variable 6˚ fixed
Housing Mount Over the top Over the top
For Preset please add (P) after 615 or 610 ie 615/48/12/OTT For Preset please add (P) after 615 or 610 ie 615/48/12/OTT
For Side mount please change (OTT) to (SM) ie 615/48/12/SM For Side mount please change (OTT) to (SM) ie 615/48/12/SM
Accessories:
Column spacer 700 (150mm) 702 (300mm)
Wall bracket 704 (for above pan/tilt motors) 704 (for above pan/tilt motors)
Corner bracket 706 (for 704 wall bracket) 706 (for 704 wall bracket)
IR Mount 600DER 600DER