Operating instructions

CCT730 V1.1
27
Motion Detect
1 Motion Detect
OFF
2 Configuration Table 2
3 Condition Set Up
4 Exit
Event
List
1 02/10/20 08:12:39 L16
2 02/10/22 12:38:21 A3
3 02/10/22 15:58:53 M12
---Continue---
enable/ disable the alarm output pins. If the alarm output is OFF (disabled), the relay will not be
energized when an alarm is triggered.
Event List
Up to 255 alarm events will be logged in the unit’s non-volatile
memory. A full list can be accessed on this menu, which displays
the alarm event number, the date, the time, the type of event and
finally the channel it occurred on. For the type of event “A”
represents Alarm Input, “L” represents Video Loss, and “M”
represents Motion Detection.
Event Full Screen
When an event occurs on any camera input, the image from this camera can be displayed on
the main monitor in a full screen display and kept until its response duration has passed. This
option allows you to enable/ disable this function.
Call Event Display
If set to YES, the Call Monitor will be made to switch to the activated camera as soon as an
event is triggered. Otherwise, the Call Monitor switches between each installed camera
sequentially.
Response Duration
This item allows you to decide how long the buzzer and Alarm Out relays continue after an
event is triggered. This ranges from 1~9999 seconds.
Any Key To Stop
When the event is triggered, the buzzer will beep and the Alarm Out relay will be activated. If
you want to stop these actions by pressing any one key on the front panel of the CCT730, then
you must select YES for this item.
6.6.3 Motion Detect
This menu allows you to configure how the Motion Detection feature
operates. Each camera channel can have its own “Detect Area” and
“Sensitivity” individually defined.
Motion Detect
This item allows you to globally enable/ disable the motion detect
function of the CCT730.