User`s manual

3
anti-interruption ability
11. If the power is off when the unit is scanning or cruising, it will automatically resume scanning or
cruising once power supply is on.
12. Support 16 preset positions, 1 tour, left & right scan, 360° scan.
13. The unit has one guard position; the user can preset it for a key monitor area according to the actual
conditions. If not operated after 5 minutes, it will automatically monitor the preset position.
1-3 Main Technical Data
Power supply DC14V---15V 2A
Dome motor DC14V---15V/0.5A
Camera lens motor DC12V/100mA
Camera power supply 12V/1A
Heater & fan working range Fan(≥50°C); heater (≤5°C)
Addresses range
1～63
Communication system RS485 bus controlling
Communication protocol Pelco-D, Pelco-P, Pelco-D1
Baud rate 1200bps, 2400bps, 4800bps, 9600bps
Controlling device video matrix, DVR controlling keyboard
Preset position quantity 16 preset positions
Auto Scan Scan between two points and 360° endless scan
Tour group quantity 1 group(16 preset positions can be included)
Electric
Default position function Yes
Dome movement pan 360° endless, tilt 0°-90°
Dome speed 6º/S, 9º/S, 15º/S, 20º/S adjustable
Mechanical
Movement limiting position pan adjustable within the dome movement scope
Ambient temperature
0ºC～49ºC (without temperature controlling devices)
-40ºC～60ºC (with temperature controlling devices)
Ambient
Relative Humidity ≤95%RH
Image Sensor
1/4〞Super Had CCD
Resolution 480TV Line
Lens f=3.25-88mm High Durability 27X Zoom Lens
Angle of View 48 degrees (w) Horizontal 3 degrees (t)
Sync System Internal/Line Lock NTSC 60 Hz , PAL 50HzC
Minimum illumination 0.5Lux/0.1Lux with B/W mode
IR Sensitive 0Lux with IR on
Video Focus Auto/Manual (Near-Far)
White Balance Auto/OFF
BLC Auto/OFF
Electric shutter
1/50～1/12000s
S/N Ratio >50dB
Camera
Video Output Composite 1.0+/-0.2Vp-p