User`s manual

dome camera will automatically scan the preset positions set in the tour consecutively and circularly. Up to 16

preset positions can be saved in one tour group

A. Setup of Tours

a. In the keyboard initial state, enter number “140”(110) and press the “PREVIEW” key to enter

the tour setup.

b. After entering the setup, add preset position number to the tour. Enter the preset position

number and press the “PREVIEW” key, the first preset position is successfully added. Then

goes the second one. Enter the second preset position number and press the “PREVIEW” key,

the second preset position is successfully added. Up to 16 preset positions can be added in the

same way.

c. After all the required preset positions having been added in the tour, enter the number

“141”(111) and press the “PREVIEW” key to exit the tour setup.

B. Start Running a Tour

In the keyboard initial state, enter number “142” (112) and press the “PREVIEW” key to start

running the preset tour.

Example: Set up the tour order to be 1→2→5→3→4→6 (please set up preset positions before tour setup)

1. Enter number “140”(110) and Key “PREVIEW” for beginning setup

2. Enter number “1”and key “PREVIEW”, the position “1” is added in the tour group as first tour

position

3. Enter number “2”and key “PREVIEW”, the position “2” is added in the tour group as second tour

position

4. Enter number “5”and key “PREVIEW”, the position “5” is added in the tour group as third tour

position

5. Enter number “3”and key “PREVIEW”, the position “3” is added in the tour group as fourth tour

position

6. Enter number “4”and key “PREVIEW”, the position “4” is added in the tour group as fifth tour

position

7. Enter number “6”and key “PREVIEW”, the position “6” is added in the tour group as sixth tour

position

8. Enter number “141”(111) and key “PREVIEW” to exit tour setup)

9. Enter 142(112) and key “PREVIEW” to start running the tour, the dome camera will runs in order of

1→2→5→3→4→6.

3-6 Setup and scan between two points

The speed dome camera has Left/Right scanning function. The user can set up the left and right limiting

positions for the scanning area requested. When running the left/right scan, the unit will scan forwards and

backwards between the left and right limiting positions consecutively.