VM-16RT Video Multiplexer for CCTV User’s Manual www.cctvcamerapros.
Directory 1.System Features………………………………………………2 2. Rear Panel Installation………………………………………3 3. Front Key Operation…………………………………………4 4. Function description………………………………………..5 4.1Button MENU / AUDIO……………………………………….5 4.2 Button AUTO/ FREEZE………………………………………5 4.3 Button ZOOM/MODE ………………………………………..5 4.4 Button VCR / ENTER………………………………………...6 4.5 Button M4-A / ▲…………………………………………….6 4.6 Button M4-B / ▼…………………………………………….7 4.7 Button M8/◄………………………………………………...7 4.8 Button M9/►……………………………………………..…7 4.
2 / 19
1.
2.Rear Panel Installation 16 Split system Camera Connection Accept 16 loop composite video inputs from the camera. Monitor Connection Provide 1 composite video output for the main monitor. VCR OUT Connection Provide 1 composite video output for recording in the VCR. VCR IN Connection Accept 1 composite video input for playback from the VCR. AUDIO IN Connection Accept 4 composite audio inputs from the camera. AUDIO OUT Connection Provide 1 composite audio output for the main monitor.
3.Front Key Operation 16 Split system front panel Note: (*L) – Press key continuously more than one second to enter menu options. (**S) – Press key less than one second to enter menu options. ⑴ MENU (*L) : Enter or Exit main menu mode. AUDIO (**S) : switch audio channel or turn off audio ⑵ AUTO (*L) : Auto channel switch ON/OFF FREEZE (**S)：Press it to freeze/un-freeze display windows. ⑶ ZOOM (*L) : Enter or exit ZOOM display mode. MODE (**S) : Enter 16 Split ,picture in picture and Dual Split mode.
⑾ 3/11 / FULL : Channel 3 ( channel 11) display ⑿ 4/12 / FULL : Channel 4 ( channel 12) display ⒀ 5/13 / FULL : Channel 5 ( channel 13) display ⒁ 6/14 / FULL : Channel 6 ( channel 14) display ⒂ 7/15 / FULL : Channel 7 ( channel 15) display ⒃ 8/16 / FULL : Channel 8 ( channel 16) display 4. Function description 4.1 Button MENU / AUDIO ● MENU: Press the MENU (*L) button to enter or exit menu setup. ● AUDIO : Press the AUDIO (**S) button to switch audio channel to listion in or turn off audio. 4.
● ZOOM : Press the ZOOM (*L) button to enter 2 * ZOOM mode. The user can use the “M4-A / ▲ “, “M4-B / ▼ “, “M8/◄“, “M9/►“buttons to move the ZOOM-in frame. Press the ZOOM (*L) button again will return to previous display mode. ● MODE : Press the MODE (**S) to enter the MODE setup mode. By default, the display modes are circulated as the following sequence, Non-realtime 16 Split, realtime 8split,2 Picture-in-Picture, 1 Picture-in-Picture and Dual Split for each MODE key .
4.4 Button VCR / ENTER ● VCR : Press the VCR (*L) button to enter VCR playback mode. The user can use 4 arrow keys and 4 channel keys(▲,▼,◄,►，1/9，2/10，3/11,4/12) to select each channel in the VCR mode. Press the VCR (*L) button again will return to previous display mode. ● ENTER : In menu setup mode ,press the ENTER (**S) to select the value. 4.5 Button M4-A / ▲ ● ● ● M4-A: Press the M4-A (*L) button to enter PTZ controlling function.Press the M4-B (*L) button again to exit PTZ controllling function.
Connect Power Cable Connect Power Cable 7/ 15 8 / 16 FULL FULL PAL NTSC 4.11 PTZ Function ⑴ Press the MENU (*L) key to enter the system establishment main menu, choose "system setup"and enter by press the ENTER (**S) key, "ptz setup" must establish for "yes" ,then press the ENTER (**S) key to enter the sub-menu . Then adjust the value to ensure the value match as the channel of ptz connected. ⑵ Press the M4-A (*L) button to enter PTZ controlling function.
10 / 19
5. Setup Menu Operation The system provides a built-in GUI setup screen. For each menu, the key function is described in the lower region to help operation. The following figure shows the structure of GUI menu.
5.1 Setup Main menu: Press MENU (*L) key to enter main menu setup. Move cursor to the item of needed setup with ▲/▼.Press ◄/► to select the value. Press ENTER key to enter submenu. Press MENU (**S) key to exit last menu. Press MENU (*L) to exit main menu setup. 5.2 System Setup Menu 1） Press▲/▼ to select the item of setup .Press◄/► to select the value ； 2） DATA：there are three kinds of display format to data：MM-DDYY DD-MM-YY ，YY-MM-DD。Default：YY-MM-DD，07-07-07 3） TIME: time setup.
FACTORY RESET: comeback to factory setup. Press ◄/► to select YES or NO. If select NO, press ENTER to enter into next dialog box. Press ◄/► to select YES and press ENTER to comeback factory setup. Default：NO Factory Reset Menu FACTORY RESET WARNING! THIS SYSTEM GETS TO LOSE THE CURRENT SETTING VALUE AND WILL BE INITIALIZED WITH FACTORY RESET MODE.
5.3 Display Setup Menu DISPLAY SETUP DISPLAY ON SCREEN ☑ ☑ ☑ SCREEN POSITION X : 0 Y : 0 BORDER LINE COLOR BLACK GRAY1 GRAY2 WHITE OFF SELECT ADJUST MENU EXIT ① DISPLAY ON SCREEN ： Select YES or NO to display camera title, data time in the screen. Press ▲ / ▼ to move cursor, press ENTER to change state. Display “√” ② SCREEN POSITION：Select screen display area. X position: -10 c +10. Y position: -4 ～ +3 . Default(X：0 ，Y： 0). ③ BORDER COLOR：Border colors have black, gray, white and selected.
5.4 Camera Setup Menu CAMERA SETUP CAMERA : 01 TITLE : CAMERA01 SELECT ADJUST BRIGHTNESS CONTRAST SATURATION HUE SHARPNESS : : : : : 0 0 0 0 0 MIRRORING : OFF MENU EXIT Setup each camera’s title / brightness /contrast / saturation / hue / sharpness and mirroring independently. ① CAMERA：Select the camera with ◄/►.Default: ch1. ② TITLE: Channel name setup. Press ▲/▼ to move cursor to next character and press ◄/► to change character. Default: CAMERA1 ③ BRIGHTNESS：Brightness setup.
Default :0 ⑦ SHARPNESS ： Sharpness setup. From 0 to 3 can be selected. Press long ◄/► key, value can be continued changed. Default :0 ⑧ MIRRORING ： Mirroring display camera screen. Default: OFF 5.
5.6 Event Setup Menu Setup loss detection independently of channels. ① BUZZER/REKPORT ： Control buzzer and relay in alarm, video loss and motion states. Press ▲/▼/◄/► to select item o and press ENTER to change state. “√” is ON. Default: VIDEO LOSS: NO (√). ② BUZZER HOLD TIME：OFF/1ses~99ses can be selected. Default: 5ses. ③ REPORT HOLD TIME：Report of relay. ④ Holding time. OFF/1ses~99ses can be selected. Default: 30sec.
5.7 Event Report EVENT REPORT 1 OF 6 PAGE NO YY-MM-DD HH:MM:SS CH EVENT 1 07-07-30 16:56:03 1 LOSS 2 07-07-30 16:56:03 2 LOSS 3 4 5 6 7 8 9 10 07-07-30 07-07-30 07-07-30 07-07-30 07-07-30 07-07-30 07-07-30 07-07-30 16:56:03 16:56:03 17:56:03 17:56:03 17:56:03 17:56:03 18:56:03 18:56:03 3 4 1 2 3 4 1 2 LOSS LOSS LOSS LOSS LOSS LOSS LOSS LOSS LIST CLEAR : NO SELECT SELECT PAGE MENU EXIT Display every report of alarm. Event report has 6 page totally and 10 recordings per page.
5.8 Event List Clear Menu LIS T C LE AR WAR NI NG! THI S S YS TEM G ETS T O L OS E THE CU RR ENT E VEN T LIS T AND WI LL BE I NIT IA LIZ ED WIT H B LI NK.
6. RS-232C and RS485 Interface The host providing RS-232C interface can control this system remotely. Receiving can be worked by 9600bps. The detail receiving protocol are explained in Receive Protocol section. System accepts only 1 byte to get commands from host . Connection as follow: The Explanation of connection as follow: ① Ground must be connected into together : The 5th foot of the serial port connect to the 1th foot of the RS485/RS232 connection .
Receive Protocol Byte 1st 7 1 6 0 5 4 3 2 1 0 KEY KEY 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Description NULL Channel 1 Channel 2 Channel 3 Channel 4 Channel 5 Channel 6 Channel 7 Channel 8 Channel 9 Channel 10 Channel 11 Channel 12 Channel 13 Channel 14 Channel 15 KEY 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 Description A Page 8 Unite B Page 8 Unite A Page 9 Unite B Page 9 Unite Non-realtime 16 Split 8 A Page 8 B Page 2 Picture-in-Picture 1 Picture-in-Picture Dual Split Auto Sequence Pla
FREEZE 1 POWER VCR MENU QUAD/ENTER AUTO CAM3/+ CAM4/ZOOM 3 2 4 CAM1/▲ CAM2/▼
