Manual

Useful Utilities
631
11
11.19.2 Connecting through GeoVision Protocol
GV-Decoder Box, GV-AView and GV-Eye can access the devices connected to GV-System through
GeoVision protocol.
To change the command port and login method:
1. Click the GeoProtocol tab. This window appears.
Figure 11-106
2. Type a Command Port number or keep the default port number 50000.
3. To use the login information of GV-System, select GeoVision DVR/NVR.
4. To use custom login information, select Custom and type the IP and Password.
5. Click Apply.
Note: GV-Mobile Server is not supported on GV-AView V1.0 / 1.1 and GV-Eye V1.0. To check for
latest updates on GV-Mobile Phone Applications, go to
http://www.geovision.com.tw/english/5_4.asp
.