Manual

630
11.19.2 Connecting through RTSP
To allow third-party software to access the devices connected to GV-System using RTSP protocol,
complete the settings below.
1. Click the RTSP tab. This window appears.
Figure 11-105
2. Click Enable RTSP Streaming.
3. For a more secure connection, select ID and Password Required and type an RTSP Username
and RTSP Password.
4. Modify the default RTSP Port 8554 if necessary. By default, RTSP data port starts from 45000.
5. Click Apply.
Use the RTSP command below to connect:
rtsp://<ID>:<Password>@<IP of the GV-System>:<Port>/<CamNo_StreamNo>
For example, rtsp://admin:1234@192.168.3.111:8554/cam1_stream2
Note: The 4 matrix channels can be accessed using camera number 33 to 36. For example, the
RTSP command for the second matrix channel may be
rtsp://admin:1234@192.168.3.111:8554/cam34_stream1
To create a matrix channel, see Setting Up Matrix section later in this chapter.