Manual

604
11.14.3 Displaying TV Quad Panel
On the main screen, click the TV-Out button . This panel will appear. Alternatively, you can run
this panel independently without the Main System by running QuadTV.exe from the GV folder.
1
3
4
5
2
7
6
10
8
9
Figure 11-86
The controls on the TV Quad Panel:
No. Name Description
1 Monitor Selects the monitor to be controlled.
2 Scan Automatically or manually rotates channels, and stops rotation.
3 Screen Division
Sets screen divisions. Only TV 1 can support screen divisions up to 16,
and TV 2 to TV 5 supports 1 or 4 screen divisions.
4 Channel Menu Displays the desired channel for single view.
5 Exit Closes the TV Quad Panel.
6 Previous Page Scans the previous page.
7 Next Page Scans the next page.
8 Settings Displays the TV Quad Setting window.
9 Switch Displays or hides the channel menu.
10 Zoom Esc
A
fter single view, click this button to return to the first scanned page or
return to the last channel when the screen division is set to 1.
Note: If the DSP Spot Monitor function is enabled at the same time with the Quad Spot Monitors, the
TV-Out button has two options: Spot Monitor Panel and TV Quad Panel. Select the desired panel to be
displayed on the screen.