Manual

Useful Utilities
519
11
11.2.4 Starting TwinDVR
1. Run TwinDVR.exe. The TwinDVR dialog box appears.
Figure 11-9 TwinDVR Setup
2. Type the IP address of TwinServer in the Server IP field.
3. Keep the server port in default, or it should match the TwinServer port. See Figure 11-7.
4. Click the Connect button to establish the connection between TwinDVR and TwinServer. A valid
user ID and password are required.
If the connection is established, the Network Server, Show Video Status, and Test Video buttons will
be available. You can now use them to set up TwinDVR for:
• Testing Video Stream
• Starting WebCam Server at TwinDVR
• Setting Multiple TwinDVRs in TCP/IP Mode
• Setting Multiple TwinDVRs in Multicast Mode