Manual

364
8.2.9 Multicast Settings
These settings allow you to perform multicast and audio broadcast functions. For details, see Multicast
and Audio Broadcast later in this chapter.
Figure 8-12
 Multicast: By default the IP address is 224.1.1.2, and port number is 8300 to send the video and
audio stream. Optionally, you can specify a Password for hosts to activate multicast. Click the
Camera and Audio buttons to select which camera and audio are accessible through multicast.
 Receive Broadcast Audio: By default the IP address is 224.1.1.3, and port number is 8400 to
receive audio broadcasting.
 Network Card: Select another network card, if available, to run the Multicast service on a
different network. Since the Multicast service can take a lot of bandwidth when enabled,
separating it from the main network is advised whenever possible.