Owner's manual

Useful Utilities
575
11
11.11.6 Block List Setup
Two types of block lists are provided to restrict access to a WebCam server: permitting and denying a
specified range of IP address to establish the connection. Note that only one type of block list can be
used at one time.
1. Click Configure on the menu bar, and select IP White / Black List Setup. A dialog box prompts
for you to select a host.
2. Select the desired WebCam server, and click OK. This dialog box appears.
Figure 11-63
3. Select the type of block list you want to use, and click Add to define the IP addresses.
 Enable IP White list: Allows the defined range of IP addresses to establish the connection.
 Enable IP Black list: Prohibits the defined range of IP addresses from establishing the
connection.
4. Click OK to apply the settings.