Owner's manual

Useful Utilities
503
11
11.1.2 Registering Domain Name with DDNS
1. Go to Windows Start, point to Programs, select DDNS, and then run Dynamic DNS Service.
The DNS Client dialog box (Figure 11-3) appears.
2. Click Register. The following Dynamic DNS register page appears.
3. Type a username. The username can be up to 16 characters. The username accepts “a ~ z”,
“0~9”, and “-“, but does not accept space or “-“ as the first character.
4. Type a password. The password is case-sensitive and must be at least 6 characters. Re-type the
password for confirmation.
5. In the Word Verification section, type the code within the box. In this example, the code you
should enter is 4NCXRC. Word verification is not case-sensitive.
Figure 11-1
6. Click the Send button. The following message appears.
Figure 11-2