Owner's manual

Remote Viewing
441
8
Playing Back the Recordings
To play back the recordings from the GV-System, follow these steps:
1. Enable these two functions on the WebCam Server.
A. Enable the Run ViewLog Server option on the General tab. For details, see General
Settings in WebCam Server Settings earlier in this chapter.
B. Enable the Mobile function on the Mobile tab, and keep the RPB port to be 5511 or modify it
if necessary. For details, see Mobile Settings in WebCam Server Settings earlier in this
chapter.
2. Execute GV-SSView V3 on your smartphone.
3. Click Options, and then select RPB (see Figure 8-70). If you want to search the recordings within
a specific period of time for playback, select RPB With Time.
Figure 8-73
4. On the Login screen, enter the IP address of your GV-System, port value (default value is 5511), a
username and a password. Then click Options and select Video Server.
5. Select the desired recording on the event list for playback.
Note:
1. The remote playback (RPB) function is only supported if the video was recorded with a resolution
of CIF or lower.
2. The remote playback (RPB) function does not support the playback of video files recorded on the
GV IP devices.
Other Functions
In addition to live view, GV-SSView V3 offers other useful functions, such as changing camera
channels, zooming in a camera view, rotating images and seeing Server and WebCam information.
Select Options to have these features.