Owner's manual

430
Other Functions
In addition to live view and playback, GV-GView V2 offers these functions: viewing and controlling I/O
devices, PTZ control, adjusting image quality, starting and stopping recording.
On the live view screen, click the buttons on the toolbar to have the desired functions.
Figure 8-57
Button Description
Click it to stop the connection.
Click it for Focus-in / Focus-out and Zoom-in / Zoom-out control. This is only
available when the camera supports PTZ functions.
Click it to move the camera to different directions. This is only available when
the camera supports PTZ functions.
Click it to move the camera to the preset positions. This is only available when
the camera supports PTZ functions.
Click it to adjust the image quality.
Click it to access the connected I/O devices.
Click it to start or stop recording.
Click it to display the camera status.
The supervisor is given the highest priority to control the PTZ camera and
won’t be restrained by 60-second time limit. When the supervisor logs in, the
Timer shows 999.
Use this drop-down list to switch cameras.