Owner's manual

422
8.11 Event List Query
With the Event List Query function on the WebCam server, you can remotely locate a desired event by
defining search criteria. The search results can be displayed in a text form or a statistic chart. You can
also play back any suspicious events instantly.
To allow remote access to GV-System, ensure the WebCam server with the Run ViewLog Server
function (Figure 8-4) is activated on GV-System.
1. On the left panel of the Single View page (Figure 8-19), click Remote Play Back and select Event
List Query. The Query window appears.
2. On the left panel, select one of the following query categories, and then click Submit Query at the
button of the panel to change the category:
 Monitor: monitored events
 System: system activities
 Login: user login/logout status
 Counter: counter events
 POS: POS transaction events
Note that the above categories are based on those of System Log in the Main System, so you can
also locate the same event recorded in System Log.
3. Define the search criteria such as Event Type, Device, Information, Date and etc. The selection of
search criteria may vary depended on query categories.
4. If you search the events recorded during the Daylight Saving Time period, select DST Rollback
and define a certain period of time in the Date column.
5. Click Submit Query. The search results will be displayed in the text form.
6. To play back the attached video, click the Video icon.
Righting-click on the video image gives you more playback features, such as changing playback
mode and turning on audio if available.
7. To graph the search results, click the Chart button.