Owner's manual
Table Of Contents
- Cards Supported
- Contents
- 1. Configuring Main System
- 1.1 Getting Started
- 1.2 System Configuration
- 1.2.1 Configuring Global Recording Parameters
- 1.2.2 Setting Data Storage
- 1.2.3 Adjusting Individual Camera
- 1.2.4 Setting Day and Night Recording Mode
- 1.2.5 Geo Mpeg4 Advanced Settings
- 1.2.6 Selecting Screen Layout
- 1.2.7 Launching from System Tray
- 1.2.8 Installing Cameras and Audios
- 1.2.9 Setting Auto Reboot
- 1.2.10 Setting Text Overlay
- 1.3 Audio and Video Settings
- 1.4 Camera Monitoring
- 1.5 Account and Password
- 1.6 System Idle Protection
- 1.7 System Log
- 1.8 Recording Schedule
- 1.9 Schedule Center
- 1.10 Hotline Notification
- 1.11 E-mail Notification
- 1.12 PTZ Control
- 1.13 Pop-up Live Video on Triggered Events
- 1.14 Video Noise Solutions
- 1.15 Picture-in-Picture View
- 1.16 Picture-and-Picture View
- 1.17 Fisheye View
- 1.18 Shortcuts
- 1.19 Touch Screen Support
- 1.20 System Tools
- 2. Hybrid and NVR Solution
- 3. Video Analysis
- 3.1 Object Tracking and Zooming
- 3.2 Advanced Single Camera Tracking
- 3.3 Digital Object Tracking
- 3.4 Object Counting and Intrusion Alarm
- 3.5 Object Index
- 3.6 Automatic Video Snapshots
- 3.7 Face Detection
- 3.8 Face Count
- 3.9 Unattended and Missing Object Detection
- 3.10 Privacy Mask Protection
- 3.11 Scene Change Detection
- 3.12 Panorama View
- 3.13 Video Defogging
- 3.14 Video Stabilization
- 3.15 Advanced Motion Detection
- 3.16 Crowd Detection
- 3.17 Advanced Scene Change Detection
- 3.18 Advanced Unattended Object Detection
- 3.19 Advanced Missing Object Detection
- 3.20 Video Analysis Schedule
- 3.21 Specifications
- 4. Video Playback
- 5. Backup, Deletion and Repair
- 6. I/O Applications
- 6.1 I/O Device Setup
- 6.2 I/O Control Panel
- 6.3 Advanced I/O Applications
- 6.4 Input State Detection
- 6.5 I/O Enable Setting
- 6.6 Advanced I/O Panel
- 6.6.1 The Advanced I/O Panel
- 6.6.2 Creating a Group for Cascade Triggers
- 6.6.3 Configuring the Advanced I/O Panel
- 6.6.4 Setting Up Mode Schedule
- 6.6.5 Quick Link
- 6.6.6 Forcing Output
- 6.6.7 Editing Background Image
- 6.6.8 System-Wide Triggers
- 6.6.9 The “Advanced Logical Input Status in Multicam” Option
- 6.6.10 Managing a Group of I/O Devices
- 6.7 Visual Automation
- 6.8 Virtual I/O Control
- 7. Point-Of-Sale (POS) Application
- 8. Remote Viewing
- 8.1 Remote Viewing Using a Web Browser
- 8.2 WebCam Server Settings
- 8.3 Single View Viewer
- 8.3.1 Control Panel
- 8.3.2 Server List
- 8.3.3 Video Recording
- 8.3.4 Alarm Notification
- 8.3.5 Video and Audio Configuration
- 8.3.6 Hardware-Compressed or Megapixel Stream
- 8.3.7 PTZ Control
- 8.3.8 Visual PTZ Control Panel
- 8.3.9 I/O Control
- 8.3.10 Visual Automation
- 8.3.11 Picture-in-Picture View
- 8.3.12 Picture-and-Picture View
- 8.3.13 Image Enhancement
- 8.3.14 Remote Configuration
- 8.4 2-Window Viewer
- 8.5 Multi-Window Viewer
- 8.6 Multi View Viewer
- 8.6.1 Starting Multi View
- 8.6.2 Host List
- 8.6.3 Channel Status Information
- 8.6.4 Adding a Host
- 8.6.5 Combining Multiple Hosts into a Single Host
- 8.6.6 Video Recording
- 8.6.7 Camera Polling
- 8.6.8 Hardware-Compressed or Megapixel Stream
- 8.6.9 PTZ Control
- 8.6.10 Visual PTZ Control Panel
- 8.6.11 Output Control
- 8.6.12 Remote ViewLog
- 8.6.13 System Configuration
- 8.6.14 Camera Status
- 8.6.15 Host Information
- 8.6.16 Icon Image Change
- 8.7 Multicast and Audio Broadcast
- 8.8 JPEG Image Viewer
- 8.9 Remote Playback
- 8.10 Remote ViewLog
- 8.11 Event List Query
- 8.12 Download Center
- 8.13 Mobile Phone Applications
- 9. E-Map Application
- 10. Short Message Service
- 11. Useful Utilities
- 11.1 Dynamic DNS
- 11.2 TwinDVR System
- 11.3 Watermark Viewer
- 11.4 Twin View Display
- 11.5 Windows Lockup
- 11.6 Authentication Server
- 11.7 Fast Backup and Restore
- 11.8 Hot-Swap Recording
- 11.9 Backup Server
- 11.10 Backup Viewer
- 11.11 Bandwidth Control Application
- 11.12 Report Generator
- 11.13 Spot Monitor Controller
- 11.14 Quad Spot Monitor Controller
- 11.15 Digital Matrix
- 11.16 GIS Recording
- 11.17 GV-IP Device Utility
- 11.18 MCamCtrl Utility
- Troubleshooting
- Appendix
- A. USB Dongle Required for IP Device Applications
- B. Supported PTZ Protocols and Models
- C. Certified PTZ Models for Object Tracking
- D. Certificated PTZ Models for Full Degree Pan and Tilt Control
- E. Supported IP Device Brands
- F. Supported GPRS Models
- G. Custom Icon Naming Chart for Multi View
- H. Display Ratio Supported by Panel Resolution
Remote Viewing
361
8
8.2.3 Video Settings
Figure 8-6
Max. Channel(s): Specify the number of channels allowed to access the WebCam server, with
the upper limit of 200 channels.
Max Image size: Select a maximum resolution on the WebCam server. The default resolution on
the WebCam is Normal (320 x 240).
¾ For DVR video source, if you want to view the image of Middle (640 x 480 (De-interlace),
704 x 480 (De-interlace)) or Large (640 x 480 or 704 x 480) size on the remote site, you also
have to configure a corresponding Video Source at the GV-System. Click the Configure
button on the main screen (No. 14, Figure 1-2), point to A/V Setting, and then select Video
Source. In the Video Resolution field, select 640 x 480 or higher resolutions, and then click
OK to apply.
¾ For IP video source, you may have larger size than DVR’s. Besides normal, middle and large
size, you can select Actual Size of that IP video. Refer to Hardware-Compressed and
Megapixel Stream in Single View Viewer and Multi View Viewer later in this chapter.
Allowed PTZ camera: The option allows you to control selected PTZ cameras at a remote
computer. Click the button and select the desired PTZ cameras to work on the WebCam server.
Note: To specify the time length allowed for a guest user to access the WebCam server, click the
Configure button on the main screen, select General Setting, select Password Setup, and select
Local Account Edit. On the WebCam tab, select the Limit Connection Time option and specify the
time length. The time range is between 10 and 3600 seconds.