Owner's manual

Video Analysis
145
3
Starting Object Tracking
After the above settings, you can start the object tracking application. Click the Configure button (No.
14, Figure 1-2), point to Video Analysis, select Object Tracking Application, and then click Object
Tracking Start to start the function.
Tip: You can interrupt the PTZ camera tracking and take over the camera control by using PTZ
Control Panel on Main System, PC’s keyboard and GV accessories such as GV-Keyboard, GV-IR
Remote Control, and GV-Joystick. When the controlling device or panel is inactive for over 5
seconds, the PTZ camera will go back for tracking.
Zooming in Objects
While the PTZ is being applied for tracking, you can still control it to zoom in any desired area by
launching the Zoom in Dialog window.
1. Click the Configure button (No. 14, Figure 1-2), point to Video Analysis, select Object Tracking
Application, and then click Object Tracking View to launch the Zoom in Dialog window,
overlapping in the main screen, as shown below.
Note: The Zoom In Dialog window is for the stationary camera view and the main screen is for the
PTZ view.
Figure 3-7 The outlined area in the Dialog window is magnified on the main screen
2. In the Zoom In Type field, select Fixed Camera.
3. In the Camera field, select the assigned camera view for the stationary camera.