Instruction Manual

Configuring Main System

 Option: Functions included in the Option may be different in terms of PTZ models. Consult

the manual of the connected PTZ model.

 Address Select: Specify the address of the PTZ.

 Show Preset: Moves the PTZ to a preset point by clicking the preset number. If the PTZ

supports more than 16 presets, an onscreen keypad is displayed for you to enter the desired

preset number.

Note: Each PTZ will need to be addressed correctly. Refer to the PTZ manufacturers’

documentation for details.

For the supported PTZ models, see Appendix B.

Mapping PTZ Cameras

This option assigns a PTZ camera to its corresponding camera channel for either the local or the

remote applications.

z For local applications, see Auto Switching PTZ Control Panels and PTZ Automation later.

z For remote applications, this option will let you control PTZ cameras through the WebCam or

Center V2 server.

1. Click the Configure button (No.14, Figure 1-2), point to Accessories, and select Camera

Mapping PTZ Dome. This dialog box appears.

Figure 1-50 Camera Mapping Setup