Manualshelf

Instruction Manual

ManualsBrandsCCTV Camera Pros ManualsVideo surveillance systemsGeovision 8.3 Multicam Digital Surveillance System
461462463464465466467468469470
454
Setting Live View with Pop-up Alert
You can set a different live view mode with pop-up alert together for each monitor. When alert events
occur, the live video of the associated camera will pop up on the assigned monitor to replace its live
view mode.
1. To configure live view mode, follow the instructions in Setting Live View topic earlier.
2. To configure pop-up alert, in the upper left column, click Event Popup. Figure 11-89
appears.
3. Configure Motion Trigger, I/O Trigger, Popup Dwell Time and Popup Interruption
Interval for each monitor. For details see Setting Pop-up Alert topic earlier.
4. Click the Matrix icon and return to Figure 11-87. Ensure the Live Mode option is
selected.
5. Click OK. The live view mode you configured for each monitor is displayed.
6. Start monitoring. When alert events occur, the associated camera will pop up on the
desired monitor.