Manualshelf

Instruction Manual

ManualsBrandsCCTV Camera Pros ManualsVideo surveillance systemsGeovision 8.3 Multicam Digital Surveillance System
431432433434435436437438439440
Useful Utilities
421
11
Starting Backup Viewer
1. Go to Start, point to Programs, select Backup Viewer, and then click GeoVision Backup
Viewer.
2. In the Backup Viewer window, click the Connect button on the toolbar. This dialog box
appears.
Figure 11-57
3. Type the IP address of the storage system and initiator Node Name.
4. If the CHAP authentication is enabled on the storage system, you have to select CHAP
Information option, and type User Name and Target Secret (password) created on the storage
system; otherwise you cannot log in the storage system.
5. Click Connect to start. When the connection is established, the recordings are listed and
displayed.