Instruction Manual

412
Usage Requirement
You must meet the following requirement when creating node name accounts on the storage system:
z Each node name account is applied only for each host/computer to use. It is restricted to apply
one node name account on different hosts/computers due to data conflict.
Connecting to the Storage System
Before connecting the GV-System to the storage system, make sure you have installed and set up
Microsoft iSCSI initiator.
1. At the GV-System, click the Network button (No. 11, Figure 1-2), and select Backup Server. This
dialog box appears.
Figure 11-47
2. Type the IP address and user name of the storage system. Modify the port if necessary.
3. If you want the system to automatically start connection retry, specify the number of retry attempts
and the time of retry interval in seconds, and then select Retry until connected.
4. Click Connect. Once the connection is established, a Backup Server icon appears on the
system tray.
Note: The storage system will follow the recycle setting on the GV-System. For example, you set the
recycle size of 800 MB on the GV-System. When the connected hard disk from the storage system
reaches the limit of 800 MB, the recycle starts and the oldest files are overwritten.