Instruction Manual

Useful Utilities
391
11
Connecting GV-System to the Server
To configure the GV-System in order to access the Authentication Server remotely through a network
connection, follow these steps:
1. Click the Configure button (No. 14, Figure 1-2), point to General Setting, select Password
Setup, and then select Remote Authentication Setup. This dialog box appears.
Figure 11-28 Setup Remote Authenticator Server
 Use Remote Authenticator: Enable the connection with the Authentication Server.
 Allow Local supervisor to stop use remote authentic system: Allows the local supervisor
to stop the Authentication application when the connection fails. If the option is disabled and
the connection fails, the dialog box won’t be accessible until connection resumes.
 Allow user to use local account login remote application: Allows the local users to access
other remote applications with their previous password and ID settings when the connection
fails.
2. Click the Setup Server button in Figure 11-28. This dialog box appears.
Figure 11-29 PassClient Setting