Instruction Manual

366
5. Click the Send button, and the system will display the following message if the registration is
completed successfully.
Figure 11-2
 Username: The username you registered. In this example the username is “swansea”
 Hostname: The hostname you created. Hostname is made by registered username and
“dipmap.com”. In this example the host name is “http://swansea.dipmap.com”. This will be the
domain name you use for login to GV-System.
 IP Address: Your GV-System’s current IP address. This IP address will be updated every 10
minutes.
Note: Before you register a domain name with Dynamic DNS Service provided by GeoVision, you
must run any GeoVision application in the background if the installed GV-System is of version 8.2 or
later.
IMPORTANT: The DDNS service is provided purely as a favor to you. We hope it simplified the entire
idea of trying to connect an IP video device to the network. GeoVision does not and cannot warrant
that the DDNS service will be uninterrupted or error free. Please read Terms of Service carefully before
using the service. Besides GeoVision, you can also obtain the free DDNS service from these providers:
DynDNS.org
and No-IP.com.