Instruction Manual

[HotLine Notice x] The event can be set to trigger phone calls or pagers, up to three (3) units. A text
message may be sent to the pager.
Enter the telephone number
Enter the text message
Figure 1-17
1. In the Dial HotLine drop-down list, type the telephone or pager number.
2. Click Activate.
3. Select Attach Text Message and type the text messages to be sent to a pager.
The system allows you to send a custom sound file to telephone. Your computer must have
microphones connected to the MIC input of GV-System for this operation. To record a sound file, follow
these steps:
1. Click the Rec button to bring up the following dialog box:
Figure 1-18
2. Click the Record button to start recording. Speak the message script clearly to the microphone.
Click Stop button when it is done.
3. Click the Play button to listen to the recording. To save this sound file, click File, select Save as,
and then click the Change button. This brings up the Sound Selection dialog box.
Figure 1-19
22