Instruction Manual

358
Connecting GV-System to SMS Server
To connect the GV-System to the SMS Server, follow these steps:
1. In the Main System, click the Configure button (No. 14, Figure 1-2), point to General Setting,
and then select System Configure to display the System Configure window (Figure 1-3).
2. In the Send Alerts Approach section, click the right arrow button to display this dialog box.
Figure 10-12 Send Alerts Approach Setup
3. Select Alternative Alert Approach to enable other options.
4. Specify the Interval between two sent-out messages. The Interval time can be set up to 1440
minutes. Any alert condition will be ignored by the system during the interval.
5. Click the Account Setting button to display this dialog box.
Figure 10-13 SMS Setup- Connection Setup
 Server IP: Enter the IP address of the SMS Server.
 Server Port: Enter the server port of the SMS Server, or keep it as default.
 Login ID & Password: Enter a valid ID and password registered in the SMS Server (Figure
10-7).