Instruction Manual

338
Starting E-Map from a Remote Site
Activating and configuring E-Map over a web browser is possible by the WebCam server. To do so,
follow the steps below.
1. At the local server equipped with the GV-System, click the Network button (No. 11, Figure 1-2)
and select WebCam Server to display the Server Setup dialog box. Click OK to start the
WebCam server.
2. At the client PC, open the web browser and type the address of the local server. Once the
connection is established, the Single View page will appear.
3. On the left panel, click E-Map to display the E-Map window on the client PC.
The Remote E-Map Window
1 2 3 4 5 6
7
8
9
10
7
11 12
Figure 9-5 The Remote E-Map Window