Instruction Manual

Viewing Live Video Using WebCam

323

I-Mode Phone

You can monitor your GV-System remotely with

z I-Mode phone, or

z Mobile phone supporting xhtml, chtml, or html and capable of GPRS.

When using i-Mode services, you do not pay for the time you connected online, but will be charged by

the volume of data transmitted and/or received. Therefore, i-Mode will NOT receive live video

streaming; instead, it will receive one image at a time and will not receive another unless it is requested

to do so. To request another image, simply press the Enter key on your i-Mode phone. The images are

in GIF or JPEG format with resolution of 96x72 pixels.

Activating the i-Mode Function

In the Main System, click the Network button (No.14, Figure 1-2), select WebCam Server, click the

JPG tab, and check the Create JPEG/GIF file(s) as shown in Figure 6-6. Your GV-System must use a

global IP address and be accessible from the Internet.

Connecting to GV-System

After activating the i-Mode function, you can now receive live images from the GV-System via an

i-Mode phone. The interface and operation of your i-Mode phone may be different from the following

example since the interface may vary from model to model.

1. Open the i-Mode menu, and select Input Web Address.

2. Enter the IP address of your GV-System in the Address column, and then press OK.

Input Web Address

Return

Address:

http://65.59.37.172

Cancel

Figure 8-59 Opening the menu Figure 8-60 Entering the IP address of GV-server