Instruction Manual

318
PDA
GView V2 is a remote view application for Pocket PC device. It can run on PDA using Windows Mobile
5.0 and 2003.
When GView V2 detects the big screen panel of the mobile phone, images from the connected
G-System will be horizontally rotated for a better view. Resolution is set to be CIF by default.
Installing GView
GView V2 is included in the Surveillance System Software CD. This application should be installed in a
PDA device with Microsoft Pocket PC operating system.
1. Plug your PDA via USB or COM port to a computer installed with Microsoft ActiveSync (The
Microsoft ActiveSync program should come with your PDA software CD. Consult your PDA user’s
manual).
2. Run Microsoft ActiveSync in the connected computer. Make sure both the PDA and computer
are synchronized.
3. Insert the Surveillance System Software CD to the computer. It runs automatically, and a window
pops up.
4. Click Install V 8.3.0.0 System, and then click Microsoft PDA Viewer V2.
5. Follow the on-screen instructions to complete the installation.
Activating the GView Function
To allow remote access to the GV-System, you must activate the Webcam server with the Mobile
function enabled. See Figure 8-8.
Connecting to GV-System
Once GView V2 is installed into your PDA, you can use it to monitor your GV-System. Make sure your
PDA has wireless LAN adapter properly in place with access to the Internet.
1. Execute GView V2 in your PDA.
2. Click the Connect button located at the lower left corner. This displays the Login screen.
3. Type the IP address of the GV-System you wish to connect, enter a valid username and password,
and then click the OK button.