Instruction Manual

Viewing Live Video Using WebCam
295
8
See Multicast and Audio Broadcast topic later.
17 Full Screen
Switches to a full screen view. The maximum video resolution
set on the GV-System will be applied. See [Video], WebCam
Server Settings earlier in this chapter.
18 Video Polling
Rotates through the selected channels.
See Video Polling topic later.
19 Screen Division Sets screen divisions to 4, 6, 8, 9, 10, 13, 16 or 32.
20 Exit/Minimize Closes or minimizes the Multi View window.
21 Speaker Enables live audio from a remote GV-System.
22 Microphone Enables speaking to a remote GV-System.
23 Play Establishes the connection to a GV-System.
24
Stop
Terminates the connection to a GV-System.
25 Save
Saves live video.
See Video Recording topic later.
26 Quality
Adjusts video quality with two options: Geo H264 and Geo
MPEG4.
For hardware-compressed and megapixel quality, see
Hardware-Compressed and Megapixel Stream topic later.
27 Snapshot Takes a snapshot of the selected channel.
28 Save Camera to Multiple Host
Saves the selected cameras and creates a Multiple Host.
See Combing Multiple Hosts into a Single Host topic later.