Instruction Manual

Configuring Main System

Dividing the Total Frames by Frames/Sec Limitation, you will get the pre-recording

duration of each camera. For example:

Pre-recording duration = Total Frames = 30 = 5 seconds

Frame/Sec

Limitation

[Pre-Recording using HDD] Use the hard disk as a pre-recording buffer. This method gives

you much longer pre-recording time.

 Keep Pre-Record Files: Specify the number of video clips for pre-record. The maximum number

of video clips you can specify is 9, and the time range of one video clip is from 1 minute to 5

minutes. So the pre-recording time can be from 1 minute to 45 minutes. For the video clip, see

[EventLog Size] below.

 Send Event Alerts: Allows you to send out the assigned E-Mail/Hotline/SMS notification when

the selected alert conditions occur. To enable the function, follow the steps below.

1. Check the Send Event Alerts option, and click the Arrow button beside to display this dialog

box.

Figure 1-8

2. Select the desired alert events to send out the assigned notification, and then click OK for the

application.

The alert events of Intruder Event, Missing Object, Unattended Object, and POS Loss Prevention

Event are only available when the alarm settings are activated in Counter Application, Object

Monitor, and POS Application separately.

Note: To select the type of notification, see [Send Alerts Approach] earlier in this chapter.