Manualshelf

Instruction Manual

ManualsBrandsCCTV Camera Pros ManualsVideo surveillance systemsGeovision 8.3 Multicam Digital Surveillance System
251252253254255256257258259260
Point-of-Sale (POS) Application
7
5. Go to Windows Start, point to Programs, select DVR-POS, and then click DVR POS Driver. This
dialog box appears.
Figure 7-6 POS Data Sender
6. Click Start Service, and then select the COM port to send graphic data to the GV-System.
The GV-System must be configured and ready for this application. To set up the GV-System, see
Setting a POS Device below.
241