Manualshelf

Instruction Manual

ManualsBrandsCCTV Camera Pros ManualsVideo surveillance systemsGeovision 8.3 Multicam Digital Surveillance System
251252253254255256257258259260
240
Graphic-Mode POS Device
To attach the graphic-mode POS device to GV-System, first check if your POS device has these two
characteristics:
z Windows operating system
z Serial port (COM port) for output
For the application of the graphic-mode POS device, you need:
z Additional USB dongle
z POS Data Sender program (included in the Software CD)
z A cross-over RS-232 Cable
POS Data Sender
To attach the graphic-mode POS device with the Windows operating system and serial output to
GV-System, follow these steps:
1. Connect the POS device as illustrated below.
GV-System + USB dongle
POS Device
Cross-over RS232
Figure 7-5
2. Insert the Surveillance System Software CD to the POS device. It will run automatically, and a
window appears.
3. Click Install V 8.3.0.0 System.
4. Select Software POS Driver (Only for Graphic mode POS System), and follow on-screen
instructions to complete the installation.