Instruction Manual

I /O Applications
6
Advanced I/O Applications
In the I/O Application dialog box, you can configure the advanced applications, such as defining a PTZ
camera movement upon input trigger, setting momentary or maintained mode, deactivating alarm and
alert settings, and triggering an output device after video or connection lost. Click the Configure button
(No. 14, Figure 1-2), point to Accessories, click I/O Application, and select I/O Application Setting
from the menu to bring up the following dialog box.
Figure 6-8 I/O Application
Moving PTZ Camera to a Preset Location upon Alarm Events
This feature allows you to define how the PTZ camera and the GV-System will respond to an input
trigger event. Click the Arrow buttons, and select a module and its input to set up.
 Preset Go by I/O: Enable the option and select your PTZ camera from the drop-down list.
 Addr: Specify the address of the PTZ camera.
 Alarm On: Turns the PTZ camera to a preset point when the input is triggered.
 Alarm Off: Returns the PTZ camera to a preset point when the triggered input is off.
 Alarm On Dwell Time: Specify the amount of time the PTZ camera stays at “Alarm On” preset
point, before returning to the “Alarm Off” preset point.
215