Instruction Manual

132
 Tolerance Time of Alarm: Sets the duration of scene change before an alarm condition is
activated.
 Skip Instant Light Change: Select this option if your scene has the condition of sudden light
changes. See the Note in Crowd Detection.
 Invoke Alarm: Enables the computer alarm when the scene change is detected. Click the […]
button next to the option to assign a .wav sound file.
 Output Module: Activates the output device when the scene change is detected. Click the […]
button next to the option to assign an installed output module and a pin number.
 Never Recycle: Enables the system not to recycle the event files of scene change.
4. You can click Test to test your settings. If the scene change cannot be detected, increase
Sensitivity value to increase system sensitivity to changes in the camera view.
5. Click OK to apply the settings, and start monitoring to run the application.
When a scene change is detected in the camera view for the specified time, its location will be
highlighted in live video, the selected alarm or output will be activated, and the event will be recorded
as Advanced Scene Change in System Log for later retrieval.