Instruction Manual

122
 Output Module: Activates the output device when a scene change is detected. Click the […]
button beside to assign the output module and pin number.
 Live disable alarm: Choose whether to invoke the warning message when a scene change
is detected. Click the […] button beside to display Figure 3-29.
Figure 3-29 Figure 3-30
Select Auto to close the warning message (Figure 3-30) automatically or select Manual to
close it manually. Under Delay Time(s), you can define the duration of a scene change to
invoke the message. The range of delay time is from 1 to 99999 seconds.
 Never Recycle: When the item is checked, the event files of scene changes will not be
recycled by the system.
 Demo: See three examples of Focus Change and View Change. Click the Play button to see
the demonstration.
When a scene change is detected, a warning message will appear on live video (if Live Disable
Alarm is enabled), the selected alarm or output will be activated, and the event will be recorded as
Scene Change in System Log for later retrieval.