Instruction Manual

114
Unattended and Missing Object Detection
The Object Monitor program can detect any unattended and/or missing object within the camera view
by highlighting its location.
Detecting Unattended Objects
To detect any unattended objects within the camera view, follow the steps below:
1. Click the Configure button (No. 14, Figure 1-2), point to Video Analysis, and then select Object
Index/Monitor Setup. The Camera Applied Object Index/Monitor dialog box appears.
2. Select the desired cameras for the application.
3. Click the Configure button to display the Video Object Setup dialog box (Figure 3-21).
4. Click the Object Monitor tab to display the following window.
Figure 3-21 Object Monitor
5. In the Camera field, select a desired camera for setup.
6. Select Unattended Object from the drop-down list.