Manualshelf

Instruction Manual

ManualsBrandsCCTV Camera Pros ManualsVideo surveillance systemsGeovision 8.3 Multicam Digital Surveillance System
111112113114115116117118119120
Video Analysis
95
3
[Enable Mask] Click to display the mask on the defined detection region.
1. Click
to display the following dialog box, select the PTZ brand and the hardware address,
and click OK to apply the settings.
Figure 3-2
2. Choose the corresponding camera views of the PTZ and stationary cameras. In Figure 3-1, the
images of the PTZ camera show in the Camera 2 view, while the images of the stationary camera
show in the Camera 1 view.
3. Adjust the view of the PTZ camera with the sliders of Pan, Tilt and Zoom. Make sure the PTZ
camera view is as similar as possible to the stationary camera view.
4. Click the Save button
to save the both views as image references.
5. Adjust Sensitivity or keep it as default.
6. Select Define Detect Region from the drop-down menu. Use the mouse to outline a detection
region in the right image; you will be prompted to enter Detect Region. See Figure 3-3.
Figure 3-3