Instruction Manual

Hybrid and NVR Solution

[Hardware compressed data control]

The hardware-compressed data from the video IP device, such as IP Camera, Video Server and

Compact DVR, will be transmitted directly to remote servers instead of being compressed again on

GV-System. The remote servers include Center V2, Control Center and WebCam. This function is

useful when many remote servers access GV-System at one time. It can reduce the system load on

GV-System, and provide more frame rates and better image quality for each remote server.

Note: It is highly recommended to enable this function on a LAN environment because it requires a

lot of bandwidth.

[Record Frame Rate Control] Set the recording frame rate to meet your bandwidth requirements.

 Maximum recording frame rate: This option is available when the recording codec of the IP

camera is set to JEPG. Select the frame rate from 1 to 30 fps.

 Record key frame only: This option is available when the recording codec of the IP camera is set

to MPEG4 or H.264. You can choose to record key frames instead of all frames. This option is

related to the GOP setting if it is available on your IP camera. For example, if the GOP value is set

to 30, there is only one key frame among 30 frames.

For the GOP setting, see GV-Video Server and GV-IP Camera User’s Manuals.