Manualshelf

Instruction Manual

ManualsBrandsCCTV Camera Pros ManualsVideo surveillance systemsGeovision 8.3 Multicam Digital Surveillance System
101102103104105106107108109110
86
Advanced Settings
To preview video, activate audio and configure frame rate, click the desired camera (Figure 2-5) and
select Preview & Audio Setting. This dialog box appears.
Figure 2-6
[Preview Channel Select]
Drop-down List: Select the desired camera for live preview
Preview dual stream record channel: The option is only available when the dual stream is set,
i.e. the cameras for live view and recording are configured differently (see Figure 2-5). Check this
option for recording preview.
[Audio Setting]
Monitor Sensitivity: Adjust the sensitivity of the audio that will be detected. The higher the value,
the more sensitive the system is to the surrounding sound.
Gain Control: Increase or decrease the gain of the microphone.
Wave Out: Enable this option to listen to live audio from the camera.
Rec Audio: Enable this option to activate the audio recording.