User's Manual
Table Of Contents
- Using the Handset
- Making a Call
- Adjusting the Volume During a Call
- Making a Call Using the Speakerphone
- Adjusting the Speakerphone Volume
- Switching Between the Handset and Speakerphone
- Muting a Call
- Putting a Call on Hold
- Redialing a Number
- Finding a Lost or Misplaced Handset
- Saving a Number in the Phonebook
- Calling a Number from the Phonebook
- Editing a Phonebook Entry
- Deleting a Phonebook Entry
- Inserting Pauses in a Number
- Using Caller ID
- Reviewing the List of Caller ID Calls
- Store a Caller ID Number in the Phonebook
- Deleting Caller ID Calls
- Multihandset Functions
44
Multihandset Functions
Monitoring a Room
Room monitoring allows you to place a handset in a
room and listen to the sounds in that room from
another handset.
The handset that was set up for monitoring
automatically answers the page. The microphone on
that handset is turned on, and the speaker is turned
off. The handset you are monitoring from shows
Monitoring (handset name).
To turn off monitoring, press
CANCEL
(
a
)
or OFF
on either handset.
Note:
If you answer an incoming call, monitoring is
turned off.
Action
1
Place a handset in the room to be
monitored.
2
On that handset, press MENU
(
a
)
.
3
Scroll to Monitor Room and press
SELECT
(
a
)
. The display shows Ready
to monitor room.
4
On the handset you want to listen from,
press Intercom. The display lists the
handsets registered to the base station.
Note:
If there are only 2 handsets registered
to the base, pressing the Intercom button
will automatically page the other handset.
5
Scroll to the handset you set up monitoring
on and press
PAGE
(
a
)
.
1041b65o.book Page 44 Friday, March 7, 2003 11:36 AM