User's Manual

IB for MD2400/MD2401/MD2420, 21-Apr-2006 Rev. 0
WRITTEN BY: DREAMIS SO PAGE:
8
Of
21
Telephone
Standby Screen
The handset displays the handset number and user name.
Programming Functions
The system uses a menu structure to give you access to all of the built-in features. You may program the following items in main menu:,
Handset Setup, Room Monitor (only available with 2 or more handset, MD2400 can not active this feature as it has 1 handset only).
► H A N D S E T S E T U P
R O O M M O N I T O R
Handset Setup
1. Make sure your phone is OFF (not in talk mode).
2. Press the MENU button to go to the main menu.
3. Press MENU button to confirm and you may program the following items:
Set Language, Handset Name, Ringer Tone, Ringer Volume, VIP Melody, Set Tone / Pulse, Key Tone ON/OFF,
Area Code, Voice Mail #, Registration, Deregistration and Default Setting.
During programming, you may press the *EXIT button at any time to exit the menu and return to the sub-menu.
Make sure your phone is OFF (not in talk mode)
Language
1. Press the CID/VOL (/\ or V) button to scroll to the SET LANGUAGE menu.
2. Press MENU button to enter the menu. SET LANGUAGE 1ENG 2FRA 3ESP shows
in the display.
3. Use the touch tone pad on the handset to select 1ENG, 2FRA, 3ESP, or use the CID/VOL
(/\ or V) button to scroll to the desired language. English is the default setting.
4. Press the MENU button to save your selection. You will hear a confirmation tone
and the selected language shows in the display.
Handset Name
1. Press the CID/VOL (/\ or V) button to scroll to the HANDSET NAME menu.
2. Press MENU button to enter the menu. HANDSET NAME shows in the display.
3. Use the touch-tone pad to enter a name (up to 15 characters). More than one letter is
stored in each of the number keys. For example, to enter Bill Smith, press the 2 key
twice for the letter B. Press the 4 key 3 times for the letter I. Press the 5 key 3 times for
the letter L. Press the 5 key 3 times for the second letter L, and press the 1 key to insert
a space between the first and last name. Press the 7 key 4 times for the letter S; press
the 6 key once for the letter M; press the 4 key 3 times for the letter I; press the 8 key for
the letter T; press the 4 key twice for the letter H.
NOTE: If you make a mistake, use the DEL/MUTE button to backspace and delete one character at a time.
4. Press the MENU button to save your name. You will hear a confirmation tone and
the handset name shows in the display.
Ringer Tone
You may choose from ten different ringer tones (01 to 10) and ten different melodies (11 to 20).
1. Make sure the ringer is turned on. See Ringer On/Off section.
2. Press the CID/VOL (/\ or V) button to scroll to the RINGER TONE menu.
3. Press MENU button to enter the menu. SET RINGER TONE 01 shows in the
display. “01” is default setting.
4. Use the CID/VOL (/\ or V) button to scroll to the desired setting (1 through 20). You will
hear a sample of the ringer tone/melody you select.
5. Press the MENU button to save your selection. You will hear a confirmation tone