User's Manual

IB for MD2400/MD2401/MD2420, 21-Apr-2006 Rev. 0
WRITTEN BY: DREAMIS SO PAGE:
18
Of
21
Battery Safety Precautions
• Do not burn, disassemble, mutilate or puncture. Like other batteries of this type, toxic
materials could be released which can cause injury.
• Keep batteries out of the reach of children.
• Remove batteries if storing over 30 days.
Belt clip and Optional Headset
Connecting the Belt Clip
1. To attach the belt clip, insert the sides of the belt clip into the slots on
each side of the handset.
2. Snap the ends of the belt clip into place.
Connecting an Optional Headset to the
Handset
Each handset can be used with an optional headset hands
free operation.
1. Connect the headset to the headset jack on the side of the
handset The handset receiver and microphone are disabled
when the headset is connected.
2. Adjust the headset to rest comfortably on top of your head and
over your ear. Move the microphone to approximately two to
three inches from your mouth.
3. Press the TALK/END/CALL BACK button to answer a call or make calls using the headset.
4. To return to normal operation, unplug the headset from the jack.