User's Manual

IB for MD2400/MD2401/MD2420, 21-Apr-2006 Rev. 0
WRITTEN BY: DREAMIS SO PAGE:
15
Of
21
a space between the first and last name. Press the 7 key 4 times for the letter S; press
the 6 key once for the letter M; press the 4 key 3 times for the letter I; press the 8 key for
the letter T; press the 4 key twice for the letter H.
NOTE: If you make a mistake press the DEL button to backspace and erase the
wrong character(s) or number(s).
6. Press the MEM key to confirm and save the record. The display shows ENTER TEL NUMBR.
7. Use the touch-tone pad to enter the telephone number (up to 20 digits, including
pauses (press #PAUSE button)), and press the MEM key again to save the record. The
unit beeps to confirm.
NOTE: The system treats PAUSES as delays or spaces in the dialing sequence.
8. To enter another name and number in a different memory location, return to step 2 and
repeat the process.
Storing the Last Number Dialed
1. Repeat steps 1 through 6 in Storing a Name and Number in Memory.
2. Press the REDIAL button on the handset.
3. Press the MEM button to save. You will hear a confirmation tone.
NOTE: If the redial number has more than 20 digits, it cannot be stored in memory.
Inserting a Pause in the Dialing Sequence (of a Stored Number)
Press the # button on the handset’s touch-tone pad to insert a delay in dialing sequence
when a pause is needed to wait for a dial tone (for example, after you dial 9 for an
outside line, or to wait for a computer access tone.) Each pause counts as one digit in the
dialing sequence.
Reviewing Records Stored in Memory
1. Make sure the phone is OFF (not in talk mode).
2. Press the MEM key to display SELECT MEMORY 01-60.
3. Press the CID/VOL (/\ or \/) buttons to scroll the records, or use the handset’s touch-tone
pad to enter the memory location number.
Changing Records Stored in Memory
Follow the procedure for Storing Names and Numbers in Memory, except replace a stored
telephone number with a new one.
Deleting Records Stored in Memory
1. Make sure the phone is OFF (not in talk mode).
2. Press the MEM key to display SELECT MEMORY 01-60.
3. Press the CID/VOL (/\ or \/) button to scroll to the record you want to delete or use the
touch-tone pad to enter the desired memory location.
4. Press the DEL button to mark the record for deletion. The display shows DELETE?
5. Press the DEL button to delete the record. DELETED shows in the display.
NOTE: If you don’t want to change or delete a record, simply press the *EXIT
button, or wait for one minute to exit the review mode automatically.
Dialing a Number from Memory
1. Make sure the phone is ON (in talk mode) by pressing the TALK button.
2. Press the MEM key to display memo # - -.
3. Use the touch tone pad to enter the memory location number. The number
dials automatically.
-OR-
1. Make sure the phone is OFF (not in talk mode).
2. Press the MEM key to display SELECT MEMORY 01-60.
3. Press the memory location for the phone number you want to dial, or use the CID/VOL
(/\ or \/) button to scroll to the number you want to dial.
4. Press the TALK button. The number dials automatically.
Chain Dialing from Memory
Use this feature to make calls which require a sequence of numbers, such as a calling card
number used for a frequently called long distance number. The following example shows
how you can store each part of the dialing sequence and use chain dialing to make a call
through a long distance service: