User's Manual

IB for MD2400/MD2401/MD2420, 21-Apr-2006 Rev. 0
WRITTEN BY: DREAMIS SO PAGE:
13
Of
21
Hold
During phone conversation, you want to hold the line, use the HOLD feature. The party on the telephone
line will be on hold.
1. Press the HOLD / FORMAT button. The handset display shows LINE ON HOLD.
2. Press the HOLD / FORMAT button to cancel and return to your phone conversation.
Note: The line will be on hold forever if you forget to press the hold to release the hold even tough you recradle the Handset on base or
charger.
Receiver Volume Control
When the handset is ON (in talk mode) you may adjust the receiver volume by pressing
the CID/VOL (/\ or \/) button. There are four volume levels to choose from. When the
maximum or minimum volume level is reached, the phone beeps twice. VOL 1 is minimum
and VOL 4 is maximum.
Do Not Disturb (DND)
DND allows you to mute the ringer of the handset.
In the standby mode, press and hold the DO NOT DISTURB button on the base. The DND
backlit indicator will light and DO NOT DISTURB shows in handset display.
To cancel, press DO NOT DISTURB again.
Handset Speakerphone Operation
NOTE: If you are using the speakerphone, remain close to handset so the party you
are speaking to can hear you.
Answering a Call with the Handset
1. When the phone rings, press the SPK button on the handset.
2. When finished, press the SPK button again to hang up.
Making a Call with the Handset
1. Make sure the phone is OFF (not in talk mode).
2. Dial the desired number, or
Press the CID/VOL ( /\ or V ) button to select the desired record,
or Press MEM button and then use CID/VOL ( /\ or V ) button to scroll to desired memory record.
3. Press SPK to dial number.
4. When finished, press the SPK button again to hang up.
Intercom Operation
The intercom feature allows you to have a conversation with another registered handset
without tying up the telephone line. And since the telephone line is not in use, you may
still receive incoming calls.
Making an Intercom Call
1. Make sure the phone is OFF (not in talk mode).
2. Press the PAGE/INT button on the handset.
3. Use the touch-tone pad to select the handset you want to page.
NOTE: To cancel page, press the PAGE/INT button again or the *EXIT button on the sending handset.
4. Wait for the person at the receiving handset to press the PAGE/INT button.
NOTE: If the receiving handset does not answer within two minutes, the intercom call is automatically canceled. The originating handset displays “NO
ANSWER”.
5. When finished, press the *EXIT button or PAGE/INT button on either handset to
deactivate the intercom.
NOTE: The system is expandable up to 6 handsets (by purchase of optional Model MD2420 handset with recharge cradle). When 6 handsets are registered,
the system can handle 2 separate intercom operations at once, for example, 1st handset intercoms with 2nd handset while 3rd handset intercoms with 4th
handset.
Receiving an Intercom Call
When you receive an intercom call, your handset beeps. To answer the call press the PAGE/INT button or TALK button.
Advanced Intercom Features
NOTE: If you are using the handset and want to switch to the speakerphone,
press the SPK button, press SPK again to end conversation. If you are using
the speakerphone and want to switch to the handset, press the TALK button, press TALK again to end conversation.