User's Manual

5. Press

▲

▼

to set up 6 different Regional Area Codes.

6. Press the [PROG/MUTE] again. You will hear a confirmation tone.

NOTE: Press the [FLASH/3 WAY/EXIT] button inside sub-menu will keep the current setting

and return to program menu.

NOTE: Press the [FLASH/3 WAY/EXIT] button inside program menu will keep the current

setting and return to the standby screen.

NOTE:

The Regional Area Code can set to blank by pressing [DELETE/HOLD] button.

NOTE: Default is - - -.

ANDSET

AME

1. Press the [PROG/MUTE] button to go into the program menu.

2. Press

▲or ▼button until ►is pointing to HANDSET NAME.

3. Press the [PROG/MUTE] button again to go into the HANDSET NAME

sub-menu. HANDSET NAME shows in the display.

4. Use the handset keypad to enter a name (up to 15 characters). More than

one letter is stored in each of the number keys. For example, to enter Bill

Smith, press the 2 key twice for the letter B. Press the 4 key 3 times for the

letter I. Press the 5 key 3 times for the letter L. Wait for 1 second. Press

the 5 key 3 times for the second letter L, and press the 1 key to insert a

space between the first and last name. Press the 7 key 4 times for the

letter S; press the 6 key once for the letter M; press the 4 key 3 times for

the letter I; press the 8 key for the letter T; press the 4 key twice for the

letter H.

5. Press the [PROG/MUTE] button to confirm setting. You will hear a

confirmation tone.

NOTE: Press the [FLASH/3 WAY/EXIT] button inside sub-menu will keep the current setting

and return to program menu.

NOTE:

Press the [FLASH/3 WAY/EXIT] button inside program menu will keep the current

setting and return to the standby screen.

NOTE: Maximum number of characters for handset name is 15.

NOTE:

Default is BLANK.

HANDSET NAME

REG. AREA CODE

► HANDSET NAME

RINGER VOLUME