User's Manual

ANDSET

EGISTRATION

To register the handset, please follow the instructions outlined below:

1. Press the [PROG/MUTE] button to go into the program menu.

2. Press

▲

▼

button until

►

is pointing to

REGISTRATION.

3. Press the [PROG/MUTE] button again to go into the REGISTRATION

sub-menu.

REGISTRATION

shows in the display.

4. Press 1, 2 or ▲,▼to choose between YES and NO. The ►icon will point

to the latest selection.

5. If YES is selected, follow the instruction showing on the screen to register

the handset.

6. Press [PROG/MUTE] button again. You will hear a confirmation tone.

NOTE: Press the [FLASH/3 WAY/EXIT] button inside sub-menu will keep the current setting

and return to program menu.

NOTE: Press the [FLASH/3 WAY/EXIT] button inside program menu will keep the current

setting and return to the standby screen.

NOTE:

You are recommended to register the handset before first use.

NOTE: Default is NO.

REGISTRATION

1 YES

►2 NO

VIBRATE ALERT

► REGISTRATION

DEFAULT

For other detail telephone setup and operation, please refer to MD220

User’s Guide.