User's Manual

occupied, the memory location and stored name and number appear on the

screen. If the memory location is empty,

EMPTY appears in the display.

3. Press the memory button again. The display shows

ENTER NAME.

4. Use the handset keypad to enter a name (up to 15 characters). More than

one letter is stored in each of the number keys. For example, to enter Bill

Smith, press the 2 key twice for the letter B. Press the 4 key 3 times for the

letter I. Press the 5 key 3 times for the letter L. Wait for 1 second. Press the

5 key 3 times for the second letter L, and press the 1 key to insert a space

between the first and last name. Press the 7 key 4 times for the letter S;

press the 6 key once for the letter M; press the 4 key 3 times for the letter I;

press the 8 key for the letter T; press the 4 key twice for the letter H.

NOTE: If you make a mistake press the [DELETE/HOLD] button to backspace and erase the

wrong character(s) or number(s).

5. Press the [MEMORY] button again to save the name. Then display shows

ENTER TEL NUMBER.

6. Use the handset keypad to enter the area code followed by the telephone

number (up to 20 digits, including pause(s)) and press the [MEMORY]

button again to save your selection. The unit beeps to confirm.

7. To enter another name and number in a different memory location, return to

step 1 and repeat the process.

NOTE: You can save the number that is in the redial memory by pressing

[7-10-11/REDIAL/PAUSE] button when entering the numbers.

NOTE: When entering numbers, Pause (P) can be entered by pressing # key two times

quickly.

EVIEWING AND

ELETING

TORED

UMBERS

1. Make sure the phone is not in TALK mode.

2. Press the [MEMORY] button on the handset.

3. Use the

▲or ▼button on the handset to scroll to the desired memory

location, or use the keypad to enter the desired memory location.

4. If you want to delete the information, press the [DELETE/HOLD] button on

the handset while the entry displays. The display shows

DELETE?

5. Press the [DELETE/HOLD] button again to confirm. The display shows

DELETED**.

- OR -

6. If the [DELETE/HOLD] button is pressed for 3 seconds after step 4, the

display shows

DELETE ALL?. Press the [DELETE/HOLD] button again to

confirm deleting all record(s). The display shows **

DELETED**.