User's Manual

20
D
EFAULT
1. Press the [PROG/MUTE] button to go into the program menu.
2. Press
▲or ▼button until ►is pointing to DEFAULT.
3. Press the [PROG/MUTE] button again to go into the DEFAULT sub-menu.
DEFAULT SETTING
shows in the display.
4. Press 1, 2 or
▲,▼ to choose between YES and NO. The ►icon will point
to the latest selection.
5. Press [PROG/MUTE] button again. You will hear a confirmation tone.
NOTE: Press the [FLASH/3 WAY/EXIT] button inside sub-menu will keep the current setting
and return to program menu.
NOTE: Press the [FLASH/3 WAY/EXIT] button inside program menu will keep the current
setting and return to the standby screen.
NOTE: Default is NO.
T
ELEPHONE
O
PERATION
For hands-free operation and convenience, your system is equipped with a
speakerphone.
For the best speakerphone performance, avoid the following:
 Areas with high background noise. (The microphone might pick up these
sounds.)
 Surfaces affected by vibration.
 Recessed areas such as in a corner, under a cupboard, or next to a
cabinet, which can generate an echo effect.

C
HARGE
I
NDICATOR
When the charge indicator is lit, the handset is correctly seated in the cradle
DEFAULT SETTING
1 YES
►2 NO
REGISTRATION
► DEFAULT
LANGUAGE