User's Manual

2. Press to hang up after finish the conversation.
MAKING A CALL
BASE
1. To make a call, press
button before you dial, OR
2. Enter the telephone number, then press
button. OR
3. Pick u the corded handset before you dial. OR
4. Enter the telephone number, and then pick up the corded handset.
HANDSET
1. To make a call, press the
button before you dial. OR
2. Enter the telephone number, then press the
button.
CHANNEL BUTTON
While talking, you might need to manually change to the channel in order
to get rid of static. Press and release
button to advance to the next
clear channel.
REDIAL (CALL BACK)
1. Press
[去電] “▼” button until “去電” show in the display.
2. Press the “▲” or “▼” button to review redial telephone list. (Please
wait 4 seconds or press
to display the talk time. This function
only available in handset)
3. Press
button on handset or button on base to dial out the
number.
OR
1. Press the
button on handset or button on base
2. Press
to dial out the number.
DELETING THE CURRENT REDIAL RECORD
1. Make sure the phone is OFF.
2. Use the
[去電] “▼” button or [頻道] / [查詢] button until “去電”
show in the display.
3. Press the “▲” or “▼” button to choose a desired redial record.
4. Press
button on handset or on base, “dELEtE” shows
on display.
5. Press
button on handset or on base again to confirm the
deletion. Or press
button to cancel the deletion.
DELETING ALL REDIAL RECORDS
1. Make sure the phone is OFF.
2. Use the
[去電] “▼” button or [頻道] / [查詢] button until “去電”
show in the display.
3. Press and hold
button on handset or on base for several
seconds. “dELEtE ALL” displays on screen.
4. Press
button on handset or on base again to confirm the
deletion. Or press
button to cancel the deletion.
IN USE/CHARGE INDICATOR
The
電源 indicator on base it lit when the phone is ON. When the
phone is in use, the
外線 indicator on the base is lit.
FLASH
If you get a busy signal, and want to dial the number again, press
button again and dial the desired number.
R KEY FUNCTION (HANDSET)
During a call, you may transfer the call to another line.
1. Press
button.
2. Dial the number that you need to transfer the call.
3. Call was answered, then press
button to hang up.
TEMPORARY TONE
This feature enables pulse (rotary) service phone users to access
touch-tone services offered by banks, credit card companies, etc., by
pressing the * (TONE) button to temporarily make the phone touch-tone
compatible. To get information about your bank account, for example, you
would:
1. Call the bank’s information line.
2. Press the * (TONE) button after your call is answered.
3. Follow the voice instructions to complete your transaction.
4. Hang up when finished. The phone returns to Pulse (rotary) service.
HOLD
Press the
button to put a call on hold. To release a line on hold,
press the
button again or pick up an extension phone.
INTERCOM MODE
PAGING HANDSET/BASE AND INTERCOM
Base Page Handset:
1. Press
button on base. “CALL” shows in the display. If press “1”
key, it will page handset 1, if press “2” key, it will page handset 2.
(Handset 1 is the default handset will be paged even “1” key was not
pressed).
2. Press the
button on handset to stop the page and intercom with
base.
3. To terminate the intercom, press
button on base or pull the
corded handset on the cradle or press
button on handset.
Handset Page Base
1. Press
on cordless handset.
2. Press
button on base or pick up the corded handset to stop the
page and enter INTERCOM mode.
3. To terminate INTERCOM, Press
button on base, or put the
corded handset on the cradle, or press
button on handset.
NOTE: When there is an external incoming ring during handset and base
under intercom mode, intercom will terminate, and the ringer will emit.
Press either
button on base or button on handset to answer the
call.
CALL TRANSFER
Base to Cordless Handset
While user is in phone conversation by using base:
1. Press
button on base
2. Enter the handset number that you want to transfer to [ 1, 2, 3,
or 4] (Handset 1 is the default handset will be paged even “1”
key was not pressed). Base will page specific handset, at the
same time an intercom melody at base and handset will be
heard until the handset answer the paging. (If user haven’t
enter the number, then all handsets will ring)
3. Press
button on handset. Then the call will be transferred
to cordless handset.
Cordless Handset to Base
While user is in phone conversation by using cordless handset:
1. Press
button on handset or “0” key.
2. Pressing
button on base. Then the call will be
transferred to base.
Cordless Handset to Cordless Handset (Only Available to Expandable
Handsets)
While user is in phone conversation by using cordless handset:
1. Press
button on handset
2. Enter the handset number [ 1, 2, 3, or 4] that you want to
transfer to. Handset will page specific handset, at the same
time an intercom melody will be heard.
3. Press
button on receiving handset to directly answer the
external call.
4. The sending handset will back to standby mode automatically
and the call will be transferred to receiving handset.
CALLER ID FEATURES
This unit receives and displays information transmitted by your local phone
company is running with FSK or DTMF system.
The unit can store up to 48 calls for later review.
CALLER ID
While you have a caller ID, the display will show as follow:
On handset:
CID icon Number of calls
Caller ID phone number
On Base:
CID Number of calls Date Time
Caller ID phone number
Provided you subscribe to Caller ID from your phone company, you are
able to see who is calling. The caller identification appears in the display
after you hear the tone.
IMPORTANT: In order to use the Caller ID functions with this unit,
you must subscribe to Number Caller ID Service. To know who is
calling while you are on the phone, you must subscribe to Caller ID.
RECEIVING AND STORING CALLS
When you receive a call, the information is transmitted by the phone
company to your Caller ID telephone between the first and second ring.
When the memory is full, a new call automatically replaces the oldest call
in memory.
REVIEWING RECORDS
As calls are received and stored, the display is updated to let you know
how many calls have been received.
‧ Press the
[來電] “▲” button to review the call records.
‧ Press the “▲” button to review the call records from the latest
one.
‧ Press the
[來電] “▲” button to scroll through the call records from
the oldest to the newest.
‧ Pres the
button to review the remaining digits of the
CID and the date and time of the CID.
TRANSFERRING CID RECORDS TO MEMORY (BASE AND HANDSET)
You may transfer a Caller ID record to your phone’s memory
1. Make sure the base or handset is OFF.
2. Press the
[來電] “▲” button.
3. Press the “▲” or “▼” button to display the desired Caller ID record.
4. Press the
button.
5. Press the desired memory location (01-16) in 2 digits.
Note: Cannot remove the first digit “0” of the memory location “01”
DELETING THE CURRENT CID RECORD
1. Make sure the base or handset is OFF.
2. Press the
[來電] “▲” button.
3. Press the “▲” or “▼” button to display the desired Caller ID record.
4. Press
button on handset or button on base, “dELEtE”
shows on display.
5. Press
button on handset or button on base again to
confirm the deletion.
DELETING ALL CID RECORDS
1. Make sure the base or handset is OFF.
2. Press the
[來電] “▲” button.
3. Press and hold
button on handset or button on base for
several seconds. “dELEtE ALL” displays on screen.
4. Press
button on handset or button on base button on
base again to confirm the deletion.
DIALING A CALLER ID NUMBER
1. Make sure the base or handset is OFF.
2. Press the
[來電] “▲” buttons.
3. Press the “▲” or “▼” button to display the desired Caller ID record. If
the number is too long, press
button to show the remaining
digits.
4. If necessary, enter (1-4) digits area code as prefix.
5. If necessary, press
button to backspace the entry.
6. Press
button on handset or button on base. The number
dials automatically.
MEMORY
Store up to sixteen 20-digit numbers in memory for quick dialing. (15
memory locations in base and 16 memory location in handset). This
memory feature is in addition to the 48 Caller ID records that can be stored
in the Caller ID memory log.
STORING A NUMBER IN MEMORY
1. Make sure the base or handset is OFF.
2. Use the number keypad to enter the telephone number you want to
store (up to 20 digits). Press the
button, then enter the desired
memory location number (01-16) in 2 digits.
REVIEWING AND DIALING STORED NUMBER
1. Make sure the base or handset is OFF.
2. Press the
button or [查詢] button on base or handset until “存
儲
” shows in the display.
3. Or press
button, and enter the desired memory location
(01-16).
4. Press the “▲” or “▼” button to display the desired Caller ID record.
5. Then press
button on handset or button on base. The
number dials automatically.
Note: If the number is too long, press
to review the remaining
INSERTING A PAUSE IN THE DIALING SEQUENCE
Press the
button to insert a delay in the dialing sequence of a