User's Manual

call.
RECALL (Flash)
Use the FLASH/DELETE button to activate custom calling services such
as call waiting or call transfer, which are available through your local phone
company.
TIP: Don’ t use the LINE
button to activate custom calling services such
as call waiting, or you’ ll hang up the phone.
CHANNEL BUTTON
While talking, you might need to manually change the channel in order to
get rid of static. Press and release the CHANNEL/SELECT button to
advance to the next clear channel.
TEMPORARY TONE
This feature enables pulse (rotary) service phone users to access
touch-tone services offered by banks, credit card companies, etc., by
pressing the * tone button to temporarily make the phone touch-tone
compatible. To get information about your bank account, for example, you
would:
1. Call the bank’ s information line.
2. Press the * tone button after your call is answered.
3. Follow the voice instructions to complete your transaction.
4. Hang up when finished. The phone returns to Pulse (rotary) service.
MUTE
To prevent the person you are speaking to from hearing you while on a call,
press the MUTE button.
PAGING THE HANDSET
This feature helps to locate a misplaced handset. Press the PAGE button
on the base. The handset beeps continuously for about 1 minute or until
you press the LINE button on the handset. You can also press PAGE
button again to cancel.
CALLER ID FEATURES
This unit receives and displays information transmitted by your local phone
company is running with FSK or DTMF system.
The unit can store up to 48 calls for later review.
CALLER ID
While you have a caller ID, the display will show as follow:
CID Number of calls
Caller ID phone number
Provided you subscribe to Caller ID from your phone company, you are
able to see the caller number.
IMPORTANT: In order to use the Caller ID functions with this unit,
you must subscribe to Number Caller ID Service.
RECEIVING AND STORING CALLS
When you receive a call, the information is transmitted by the phone
company to your Caller ID telephone between the first and second ring.
When the memory is full, a new call automatically replaces the oldest call
in memory.
REVIEWING RECORDS
As calls are received and stored, the display is updated to let you know
how many calls have been received.
• Press the CID “▲ ” button to review the oldest call
record first. If no new call in the log, display the most
recent call record first.
• Press the “▼ ” button to scroll through the call
records from the most recent to the oldest.
• Press the “▲ ” button to scroll through the call
records from the oldest to the newest.
• Press “ 0/Next” to show the remaining number digit of
CID.
TRANSFERRING CID RECORDS TO MEMORY
You may transfer a Caller ID record to your phone’ s memory.
1. Use the CID “▲ ” button to go to CID mode.
Or press the CHANNEL/SELECT button
2. Press the “▲ ” or “▼ ” button to display the desired Caller ID record.
3. Press the MEM/PROG button.
4. Press the desired memory location (01-16) in 2 digits. You will hear a
confirmation tone.
DELETING THE CURRENT CID RECORD
1. Make sure the phone is OFF.
2. Use the CID “▲ ” buttons to go to CID mode.
Or press the CHANNEL/SELECT button
3. Press the “▲ ” or “▼ ” button to display the desired Caller ID record.
4. Press FLASH/DELETE button, “ dELEtE” shows on display.
5. Press FLASH/DELETE button again to confirm the deletion.
DELETING ALL CID RECORDS
1. Make sure the phone is OFF.
2.
Use the CID “▲ ” buttons to display any Caller ID record or press the
CHANNEL/SELECT button
3. Press and hold FLASH/DELETE button for several seconds. “ dELEtE
ALL” displays on screen.
4. Press FLASH/DELETE button again to confirm the deletion.
CHANGING THE NUMBER FORMAT
The # button lets you change the format of the displayed CID number
under CID mode before dial back the number during review CID records.
1. When you scroll the CID number under CID mode and a desired CID
number shows on display, press # button once to delete the first digit
of the telephone number.
2. Press # button second times to delete the second digit of phone
number.
3. Press # button third times to delete the third digit of phone number.
4. Press # button fourth times to delete the fourth digit of phone number.
5. Press # button again to resume all deleted digits.
Note: User can delete maximum 4 digits number on a CID memory.
DIALING A CALLER ID NUMBER
1. Make sure the phone is OFF.
2. Press the CID “▲ ” buttons or press the CHANNEL/SELECT button
3. Press the “▲ ” or “▼ ” button to display the desired Caller ID record.
4. Press LINE
button. The number dials automatically.
MEMORY
Store up to sixteen 20-digit numbers in memory for quick dialing. This
memory feature is in addition to the 48 Caller ID records that can be stored
in the Caller ID memory log.
STORING A NUMBER IN MEMORY
1. Make sure the phone is OFF.
2. Use the number keypad to enter the telephone number you want to
store (up to 20 digits). To add a pause, see “ Inserting a Pause in the
Dialing Sequence” .
3. Press the MEM/PROG button.
4. Press the desired memory location number (01 through 16) in 2 digits.
You will hear a confirmation tone.
REVIEWING MEMORY
1. Make sure the phone is OFF.
2. Press the CHANNEL/SELECT button
Or press MEM/PROG button an then enter a memory location (01-16) in 2
digits.
3. Press the “▲ ” or “▼ ” button to review the memory.
Note: Press “ 0/Next” to show the remaining number digit of memory. If you
enter wrong digits, press FLASH/DELETE button to delete the wrong
digits.
INSERTING A PAUSE IN THE DIALING SEQUENCE
Press the SET TIME/PAUSE button to insert a delay in the dialing
sequence of a stored telephone number when a pause is needed to wait
for a dial tone (for example after you dial 9 for an outside line, or to wait for
a computer access tone). Each pause counts as 1 digit in the dialing
sequence.
CHANGING A STORED NUMBER
Use the same procedure to change a stored number as you do to store a
number—you’ re just replacing the phone number with a different one.
STORING A REDIAL NUMBER
1. Make sure the phone is OFF.
2.
Press REDIAL “▼ ” button to go to redial record menu.
3. Press the “▲ ” or “▼ ” button to display the desired record.
4. Press the MEM/PROG button.
5. Press number key (01-16) in 2 digits to store the phone number in the
memory location.
Note: Press “ Exit” to quit the setting.
VIP MEMORY
You can specify a desired memory to VIP. If the memory had been
specified to VIP, you will hear a VIP ringer while the specified number
reach.
1. Make sure the phone is OFF.
2.
Press the CHANNEL/SELECT button
Or press MEM/PROG button an then enter a memory location (01-16)
in 2 digits.
3. Press the “▲ ” or “▼ ” button to review the memory and choose a
memory.
4. Press MEM/PROG again to confirm it. “ UIP” will displays on screen.,
if you reach a VIP memory under reviewing memory.
5. Press MEM/PROG again to cancel the VIP setting.
DIALING A STORED NUMBER
1. Make sure the phone is OFF.
2.
Press the CHANNEL/SELECT button
Or press MEM/PROG button an then enter a memory location (01-16)
in 2 digits.
3. Press the “▲ ” or “▼ ” button to review the memory and choose a
memory.
4. Press the LINE button, the number dials automatically.
OR
1. Press LINE button.
2. Press MEM/PROG
3. Press location (01-16) in 2 digits.
IMPORTANT: If you make test calls to emergency numbers
stored in memory, remain on the line and briefly explain the
reason for the call to the dispatcher. Also, it’ s a good idea to
make these calls in off-peak hours, such as early morning or
late evening.
REVIEWING AND DELETING STORED NUMBERS
1. Make sure the phone is OFF.
2.
Press the CHANNEL/SELECT button
Or press MEM/PROG button an then enter a memory location (01-16)
in 2 digits.
3. Press the “▲ ” or “▼ ” button to review the memory and choose a
memory.
4. press FLASH/DELETE button, while the entry is displayed, “ dELEtE”
shows on display.
5. Press FLASH/DELETE button again to confirm the deletion.
Note: Press “ Exit” to quit the setting.
DELETING ALL MEMORY RECORDS
1. Make sure the phone is OFF.
2.
Press the CHANNEL/SELECT button
Or press MEM/PROG button an then enter a memory location (01-16)
in 2 digits.
3. Press the “▲ ” or “▼ ” button to review the memory.
4. Press and hold FLASH/DELETE button for several seconds. “ dELEtE
ALL” displays on screen.
5. Press FLASH/DELETE button again to confirm the deletion.
CHAIN DIALING FROM MEMORY
Use this feature to make calls which require a sequence of numbers such
as using a calling card for a frequently called long distance number.
Basically, you dial each part of the sequence from memory. The following
example shows how you can use chain dialing to make a call through a
long distance service:
The Number For Memory Location
Long distance access number 7
Authorization code 8
Frequently called long distance number 9
1. Press LINE button.
2. Press MEM/PROG and then press 07.
3. When you hear the access tone, press MEM/PROG and then press
08.
4. At the next access tone, press MEM/PROG and then 09.
TIP: Wait for the access tones before pressing the next memory
button, or your call might not go through.
STORING THE IP NUMBER
1. Make sure your phone is OFF.
2. Press and hold IP button for 3 seconds, “ IP” shows in the display.
3. Enter the IP dial up number
4. Press REDIAL/PAUSE/SET TIME button twice.
5. Press 1 or 2 or 3 to choose the type of language.
6. Enter the card number and pin number.
7. Then press # button.
8. Press MEM/prog button to confirm the number. You will hear a
confirmation tone.
For Example: Have one IP card, Card Number : 137311088888 , Pin
Number: 9888 , storage procedures:
- Press and hold IP button for 3 seconds, then “ IP” shows in the
display.
- Enter 17910(UniCom dial up number).
- Press REDIAL/PAUSE/SET TIME button twice.
- Press Key [1] (Choose Putonghua).
- Enter 1373110888889888 (Card number and Pin number).
- Press # button.
- Press MEM/prog button to confirm.
IP DAILING AND REDIALING
Make a Long distance call with IP function:
• When the phone is OFF, enter the long distance number, press IP
button, then the handset adds the IP number as a prefix on the number
and automatically dial up.
• When the handset is in CID review mode, scroll to the desired long
distance number, and press IP button, then the handset adds the IP
number as a prefix on the number and automatically dial up.
• Press the TALK/LINE button on the handset, press IP button, then you
will hear a dial tone, now you can enter your long distance number.
Redial Call ID Number:
• If set number “ 0” as a long distance code, then the handset
automatically add number ” 0” as a prefix on the call ID number when the
call ID number is over 8-digit.
• When the local number calling, if the number has prefix number “ 0” ,
please press REDIAL/PAUSE/SET TIME button to cancel the prefix
number “ 0” .
Number Lock
To prevent other user from dialing the long distance number or other
special number, such as “ 16897888” , you can set the number lock to
restrict the dialing number which is unauthorized by you. For example, long
distance ” 0” or “ 16” (1- 2 digit). To remind you, before you set the number,
please set up the pin number first. (The pin number is 4-digit number).
SET THE PIN NUMBER and Restricted Number
For example: Pine number 0588, the setting steps:
1. Press the keys [#], [#]
2. Enter the pin number 0588.
3. Enter the restricted dia number 16
4. Press MEM/Prog button to confirm the number. You will hear a
confirmation tone.
SET THE RESTRICTED NUMBER TO 0
For example: To prevent dial up the number “ 0”, you can set the first four
digit as a restricted dial number.
1. Press the keys [#], [#]
2. Enter the pin number 0588.
3. Enter the restricted dial number 0
4. Press MEM/Prog button to confirm the number. You will hear a
confirmation tone.
CANCEL THE RESTRICTED NUMBER
For example: To cancel the above restricted number, please refer the
following steps:
1. Press the keys [#], [#]
2. Enter the pin number 0588.
3. Press MEM/Prog button to confirm the number. You will hear a
confirmation tone.
NOTE: (If you forgot the pin number, please follow the following steps to
de-restricted the number)
Press the keys [* ], [* ], [4]. [0], [#], [#], MEM/Prog button in sequence.